Pocket Door Installation
As part of my original plan for my kitchen remodel I designed a large opening between the breakfast/family and dining room areas. As I neared completion I realized that this design wouldn’t work.
First, instead of making the house seem bigger, being able to see through the house from the front door actually made the house seem smaller. Secondly, the dark stained wood in the dining room clashed with the white painted wood for the eating area. Finally havin a direct flow from the front to back door is bad feng shui. Superstition is that having the front and back doors aligned causes money to flow into and out of the house — hmm been happening a lot around hear lately.
View from the living room to back of the house
The solution, install a door between the dining and family room. My architect suggested I install french doors. Taking her advice would have been much less work, but I didn’t want to loose the wall space required for door that swing into the living area. I decided upon installing a pocket door. Although they are a bit harder to install, I thought the benefit in terms of usable space would be well worth it.
Step 1 of my installation was to rip out the wall and soffett for the existing entry way between the dining room. This was not fun at all because I had reinforced the walls with structural grade plywood.
Step 2 frame the opening for the pocket door. The door I am installing is 42″ wide X7′ tall. As a result the framed int area 86″ wide X 7′ 3″ tall. You need to leave some extra height for the slider track.
Step 3 install the door. This is just a temporary door, which I used to make sure I had the framing level at the top and the door jambs are plumb. I spent a couple hours fiddling with the the door jambs to make sure they were plumb.
So that’s it my pocket door is installed — If you have questions feel free to ask. Next step is to redo my drywall.